Maximum plush.
Our tallest pile. 60 mm is the most luxurious finish we make, with maximum softness and depth for signature interiors and premium showcase spaces.
Our most premium grass, the highest DTEX and density for a plush, luxurious finish. Supplied and installed by ILAN for landscaping and decorative use, this is a landscape grass, not a sports surface.
/ Where it works
Ultra Soft at 60 mm is specified most often for the following landscape and decorative applications.
/ Specification
Yarn shape, roll dimensions, total weight and warranty terms are set per order, ask us for the current technical data sheet.
/ The 60 mm character
60 mm is the deepest pile ILAN supplies, at the highest density in the range, 20,900. It is a statement surface, chosen where the lawn itself is part of the design.
The deepest cushion in the collection. The pile closes over the shoe.
Highest in the Ultra Soft range. At 7300 DTEX and 20,900 density there is more yarn supporting every blade than at any other height, so the pile keeps its body and recovers even under sustained foot traffic.
Signature villa lawns, resort feature areas, luxury showrooms, exhibition and display builds, photography sets.
Budget leads the specification, the shorter Ultra Soft heights and the Pure Green range cost considerably less per square metre.
/ How it is built
Ultra Soft is the heaviest yarn ILAN supplies for landscape work. Four things account for the difference.
DTEX measures the mass of the yarn, how much material is in each filament. At 7300 the Ultra Soft filament is substantially heavier than commodity landscape grass, which is what gives the pile its body and its resistance to splitting under sun and traffic.
The yarn is UV stabilised so colour holds under direct Indian sun rather than fading toward grey or blue. This is the single biggest factor in how a landscape lawn looks in year three versus year one.
Four bonded layers rather than the usual two: the primary cloth the tufts are stitched through, the reinforcing layers that lock those stitches, and the coating that binds the whole assembly. More layers means tuft-bind holds when the surface is brushed, walked and cleaned.
The backing is perforated so rain and washdown water pass straight through to the sub-base instead of pooling. On a correctly prepared base the surface is usable again shortly after heavy rain.
Yarn shape, roll dimensions, total weight and written warranty are confirmed per order, ask for the current technical data sheet.
/ Across the range
Every Ultra Soft height uses the same 7300 DTEX yarn. Pile depth and density are what change, and density rises with height so the taller piles stay upright.
| Height | DTEX | Density | Character |
|---|---|---|---|
| 25 mm | 7300 | 14,900 | The hard-wearing one |
| 35 mm | 7300 | 17,900 | The all-rounder |
| 40 mm | 7300 | 17,900 | The full residential |
| 45 mm | 7300 | 17,900 | The deep plush |
| 50 mm | 7300 | 18,900 | Resort grade |
| 60 mm | 7300 | 20,900 | Maximum depth |
ILAN supplies and installs. This is the sequence a 60 mm Ultra Soft lawn follows on site.
Site measure
We measure the area, check falls and drainage, and confirm the existing sub-base. Roll direction is planned at this stage, all pile on a job runs the same way, or the joints will read as colour changes.
Base check
We build the base where the site needs one: excavation, compacted stone base, drainage and edging, checked for level and falls. Over existing concrete, tile or other hard surfaces we check the surface and falls instead.
Edge restraint
Perimeter edging is fixed so the grass has something to be secured and trimmed against, timber, aluminium or the existing hard edge, depending on the detail.
Laying and acclimatising
Rolls are set out and left to relax so the backing loses its roll memory before it is cut and joined.
Jointing
Seams are joined on jointing tape with adhesive, pile direction matched across the joint. Done properly, a joint should be invisible from standing height.
Trimming and fixing
Edges are cut to the perimeter and fixed down. Cut lines follow the edging so the finish reads deliberate.
Infill and brushing
Ballast is spread where the specification calls for it, then the pile is power-brushed upright. Brushing is what makes a new lawn look finished rather than flat.
Ballast confirmed per site; the 20,900 density carries the pile with limited infill reliance.
/ Scope of supply
Supply-only is available if you have your own installer. A full installed quotation normally includes:
Landscape grass replaces mowing, watering and seasonal patching. What little it needs takes minutes.
/ Same collection
Every height in the Ultra Soft range shares the same 7300 DTEX yarn, only the pile depth and density change.
Site measure · material take-off · installed price, usually within 48 hours.