Skip to content
‹›
WhatsApp

Pure Green grass.

A vibrant green finish with a natural appearance, our best-value choice for fresh, outdoor-ready landscaping that stands up to sun and weather.

Fresh, vibrant, outdoor-ready.

Vibrant Green FinishNatural AppearanceBest Value Choice
6300
DTEX
35–40
mm pile
14,900
Density
ILAN Pure Green artificial grass in a garden play area
ILAN Pure Green 35 mm artificial grass pile close-up35mm4 Layer Backing
DTEX
6300
Density
14,900
ILAN Pure Green 40 mm artificial grass pile close-up40mm4 Layer Backing
DTEX
6300
Density
14,900
4 Layer Backing
Vibrant, natural, built to last.
A fresh green finish engineered to hold its colour and drain through every season.
Excellent Drainage
For all-weather use.
UV Stabilized
For long-lasting colour.
4 Layer Backing
Engineered to perform.
Perfect for
Where Pure Green shines.
Ideal forGardens & lawns
Ideal forPlaygrounds
Ideal forCommercial landscapes
Ideal forRooftops

The rest of the ILAN range.

One partner for every surface, sports turf, courts, tracks, landscape grass and the netting that finishes a ground.

/ The heights

Choosing
a pile height.

35 mm
The everyday lawn

Enough depth to read as a maintained lawn while staying practical for a garden that actually gets used. The height most Pure Green projects specify.

40 mm
The fuller finish

Visibly deeper from standing height, with a slightly longer recovery. Chosen where the lawn is more feature than through-route.

Where it sits
Between the collections

Pure Green is the middle tier, 6300 DTEX against Evergreen’s 6000 and Ultra Soft’s 7300. It is the balance point when a project wants better than entry-level without the Ultra Soft budget.

What it shares
Same construction logic

UV-stabilised yarn, 4 Layer Backing and a perforated free-draining backing, the same as Ultra Soft. The difference is yarn weight and density, not build quality.

Where this collection
sits.

All three ILAN landscape collections share UV-stabilised yarn and a perforated free-draining backing. Yarn weight, density and backing build are what separate them.

CollectionTierDTEXDensity / StitchHeights (mm)Backing
Ultra SoftLuxury730017,900 – 20,90025 · 35 · 40 · 45 · 50 · 604 Layer
Pure GreenSignature630014,90035 · 404 Layer
UltraProSuper High Density730024 st /10 cm35 · 40 · 454 Layer
EvergreenEssential600013,900 – 14,90020 · 25 · 35 · 40 · 50Single / Double

Installation.

ILAN supplies and installs. This is the sequence a landscape grass project follows on site.

01

Site measure

We measure the area, check falls and drainage, and look at what the grass is going onto, soil, concrete, tile or deck. Roll direction is planned here: all pile on a job runs the same way, or joints read as colour changes.

02

Base check

We build the base where the site needs one: excavation, compacted stone base, drainage and edging, checked for level and falls. Over existing concrete, tile or other hard surfaces we check the surface and falls instead.

03

Edge restraint

Perimeter edging is fixed so the grass has something to be secured and trimmed against, timber, aluminium or the existing hard edge.

04

Laying and acclimatising

Rolls are set out and left to relax so the backing loses roll memory before it is cut and joined.

05

Jointing

Seams joined on jointing tape with adhesive, pile direction matched across the joint. Done properly a joint is invisible from standing height.

06

Trimming and fixing

Edges cut to the perimeter and fixed down, following the edging so the finish reads deliberate.

07

Infill and brushing

Ballast spread where the specification calls for it, then the pile power-brushed upright. Brushing is what makes a new lawn look finished rather than flat.

Care & maintenance.

Landscape grass replaces mowing, watering and seasonal patching. What little it needs takes minutes.

Weekly
Weekly

Brush or sweep the pile upright on the routes that get walked most, and clear leaves before they mat down.

Monthly
Monthly

Rinse with water to clear dust. The perforated backing drains freely, so washing carries dust through rather than pooling it.

Seasonally
Seasonally

Check infill where it was specified and top up. Inspect seams and edges for lifting, especially after monsoon.

As needed
As needed

Spot-clean spills with mild soap and water. Pet areas rinse clean. Localised damage is repaired by cutting in a patch rather than relaying.

Asked
often.

How does Pure Green compare with Ultra Soft?
Yarn weight and density. Pure Green is 6300 DTEX at 14,900 density; Ultra Soft is 7300 DTEX at 17,900 to 20,900. Ultra Soft feels plusher and carries more material per fibre. Pure Green shares the same 4 Layer Backing and UV-stabilised yarn, and costs less.
How does Pure Green compare with Evergreen?
Pure Green is a step up, 6300 DTEX against 6000, and 14,900 density against Evergreen’s 13,900 on most heights. Pure Green also carries 4 Layer Backing across both heights, where Evergreen runs single and double layer depending on the height.
Why only two heights?
Because 35 and 40 mm cover the great majority of residential landscape work. If you need shorter for a high-traffic path or deeper for a showcase lawn, that is what the Evergreen and Ultra Soft ranges are for.
Is Pure Green good enough for a front garden?
Yes, it is specified for exactly that. It is the value choice in the sense of price, not of construction: same UV-stabilised yarn, same 4 Layer Backing, same free-draining perforated base as the premium collection.
Does it work on balconies and terraces?
Yes. Over an existing hard surface the sub-base work becomes cleaning and checking falls rather than excavation. Drainage still needs somewhere to go, which we check at survey.
What maintenance does it need?
Brushing the pile upright on walked routes, rinsing to clear dust, and topping up infill where it was specified. Minutes rather than hours, and no mowing or watering at all.
Can I see it before ordering?
Yes, samples can be sent. Colour and pile read very differently in daylight on your own site than on a screen, and we would rather you saw it first.
What is confirmed per order?
Yarn shape, roll dimensions, total weight and written warranty terms are set per order. Ask us for the current technical data sheet.

Base construction · Landscape systems

We build the base too.

A surface is only as good as what it sits on. ILAN now builds the base as part of the project, so one team owns levels, drainage, tolerances and the surface on top. Layer thicknesses are finalised after our site survey and soil check.

/ 01 · Excavation

Topsoil and vegetation removed, 75–100 mm deep, formation trimmed to a gentle fall.

/ 02 · Stone base

Compacted crushed stone 50–75 mm with a fine grit blinding for a smooth, free-draining bed.

/ 03 · Edging

Timber, paver or concrete edging so the grass has a firm line to finish against.

/ 04 · Over hard surfaces

On concrete, tile or podium decks, no excavation: we clean, check falls and lay directly.

Base, surface and marking · one scope · one price

Get the full catalog.

Every series, height, DTEX and density in one PDF, plus backing and feature details. Or message us with your space and we'll recommend the right grass.